LOCTITE ABLESTIK 45LV: Low-Viscosity Wicking Epoxy for Tight-Tolerance Bonding
₹ 0 -
( 500 )
Available Stock
0
LOCTITE ABLESTIK 45LV (formerly ECCOBOND 45LV) is a high-strength, black epoxy adhesive engineered with a low-viscosity profile for superior flow and penetration. While it maintains the "controlled flexibility" of the standard 45 series, its thinner consistency allows it to wick into tight tolerances and fill intricate electronic modules without leaving air voids. This makes it the preferred choice for sealing delicate aviation sensors and instrumentation that require total environmental protection.
Available Sizes :
500 - GMS
| Category | Adhesive | Brand | Henkel |
| Part No. | LOCTITE ABLESTIK 45LV | OEM Part No. | Not Avaliable |
| Alt Part No. | Not Available | Country of Origin | Not Available |
| Pro Category | Not Available | Is Return | Yes |
| Condition | Self Life | ||
| Pack Size | |||
Loctite ECCOBOND 45 is a controlled flexibility epoxy adhesive It can be cured at room temperature or rapidly at elevated temperatures.
Features:
- Low viscosity
- General purpose
- Variable flexibility
- High shear strength
Application
- Narrow Gap Sealing: Wicking into tight tolerances in airframe control modules.
- Electronics Potting: Filling small cavities in connectors to prevent moisture ingress.
- Precision Bonding: Ideal for joining close-fitting optical or mechanical parts in avionics.
• Not intended for use on vertical surfaces or wide gaps where high-viscosity "non-sag" properties are required.
LOCTITE ABLESTIK 45LV
- Appearance: Clear / Amber.
- Viscosity: 5,000 to 15,000 mPa·s (Designed for high flow).
- Work Life: 120 minutes at 25°C.
- Mix Ratio: Variable (100:50 for rigidity or 100:100 for flexibility).
- Operating Temp: -40°C to +105°C.
- Pack Size: Available in 500g (Pint) kits.
- Storage: Store at room temperature (18°C to 25°C); avoid refrigeration to prevent crystallization.
- Shipping Class: Standard industrial grade; non-hazardous for most logistics routes.
- Part Number: LOCTITE ABLESTIK 45LV.
- Brand: Henkel (Ablestik/Eccobond).
- Unique Benefit: 30% lower viscosity than standard ECCOBOND 45 for superior penetration.
Conditions Info
- Application: Best applied using a syringe or needle-tip for targeted wicking.
- Cure Time: 24 hours at room temperature or 2 hours at 65°C.
- Cleaning: Remove excess uncured resin with a solvent like MEK or IPA.
